Metallic powder coatings are decorative protective finishes for Zinc Flake Coating. The multi-colored metallic powders are usually applied with single application, and then its top-coated with clear powder to further improve the conclusion much more.

Metallic and mica powder coatings contain metal flake or mica particulate matter that provides these coatings their special appearance. These flakes and particulars can be a freestanding component. Metallic and mica powder coatings are homogeneously blended with basics color powder and therefore are known as Dry-Blended powders. They are available in Epoxy, Hybrid, Urethane, and TGIC Polyester chemistries.

The down sides confronted by dry-blended powders are with color consistency, limited penetration in recessed areas, in addition to their limited ability to be recycled. Dry-blended powders are usually applied employing a corona gun using a flat spray nozzle. Metallic and mica powder coatings are processed by physically bonding those to the top of the powered coating. Generally, every one of the metallic or mica particles are bonded, however some may not be firmly attached and will cause various problems within the finishing process.

Bonded metallic and mica powder has fewer lines than dry blended powders and are more readily recyclable. Additionally, they also provide color that may be more consistent after recycling and fewer picture frame effect, and also a better penetration and better transfer efficiency. Though bonded metallic and mica powder could be reclaimed, it will always be best to minimize the ration of reclaimed powder to virgin powder which means you produce the ideal finish. Bonded powders can be purchased in Epoxy, Hybrid, Urethane, and TGIC polyester chemistries.

Metallic powders will have some drawbacks linked to them. The 1st being that aluminized powder finishes do tend to look weathered eventually. Another drawback is loading, which can be an uncontrollable loss in electrostatic high-voltage power on the tip in the spray gun and occurs because the metallic powder has established a ground path with the powder hose for the high voltage to travel. To lessen loading, a specially engineered spray muzzle may be used if the volume of Coating equipments in the powder will not be excessive.

The usage of metallic powder is the cause of several spray booth fires. Spice powder coatings are unique blends of multiple finished powder colors, resulting in a highly aesthetic and protective coating. These multi-colored powders can be purchased in Epoxy, Hybrid, Urethane, and TGIC Polyester chemistries. Spice powder coatings are normally employed for end use applications for example casual furniture, shelving, case goods, and leisure equipment. However, spice powder dacronet can be used as other items.

Spice powder coatings do pose some challenges for your applicator if compared to the use and application of smooth, solid color powders. Therefore, applicators have to use a consistent and also pattern to assure film thickness consistency and produce a quality appearance. As a result of nature of the spice powder coatings, the colour and look may vary if the powder is reclaimed. Additionally, substrate density may affect flow and appearance of your finished product.

Since metallic powder on this type is produced with the addition of pure finely ground mica or aluminum or bronze particles, you will be actually spraying a mixture of both plastic powder and also the Dacromet coating combined with it. With different guns the metallic particles with regards to the soil object may orient themselves differently. The orientation from the aluminum particles determines the ultimate finish.